40Pin-General LCD Controller Board Kit for 7 "8" 9 "10.1" LCD Panel Driver Board

Description

40Pin-General LCD Controller Board Kit for 7 "8" 9 "10.1" LCD Panel Driver Board
100% brand new and high quality
Feature:
The driver plate 40PI-CN1 can connect to the LCD screens of EJ070NA-01J,EJ080NA-04C,EJ080NA-04B,EJ080NA-01E,EJ080NA-01D,EJ070NA-13A, etc
40PI-CN2 can connect to LCD screens such as B101EW05 BP101WX1-206 BP101WX1-300 BP101WX1-200 HSD101PWW1
The definition of 40PIN can basically drive the following resolution:
An LVDS - 1024 x600-8 bit single
LVDS1024 * 768-8 bit
6 bit LVDS1280 * 800 list
8 bit LVDS1280 * 800 list
1, the drive plate is suitable for mobile phone charger --5V2A standard voltage input, beyond the specified voltage will damage the risk of circuit board and components, please carefully confirm the input voltage of the power supply
2, 1 channel USB signal input (MP5 function), USB interface can support U disk audio and video playback, picture playback, text playback can output the external device is not more than 500mA current, if too large, will cause the machine protection crash and other images.
USB can realize the software upgrade of the drive board (just put the upgrade file -HD.10.BIN in the first level directory of the U disk, and plug it into the USB of the drive board, then the upgrade can be achieved by powering on, and it will automatically restart after completion)
3,1 channel HDMI-compatible signal input, and the IC support is HDMI-compatible1.4, HDMI-compatible block using high quality gold-plated connector
4, 1-way USB Extensible Output - HDMI-compatible only
5, 1 channel stereo sound amplifier output, support power amplifier output, 8 OH-2W /4 OH-3W
6. this drive board only supports 3. 3 v LCD screen for electricity as a benchmark, and the need to conform to the standard definition of two kinds of pin 40 buildings, and at the same time, can only use a 40 pin FPC output, at the same time using two 40 pin FPC output, is likely to affect the normal working state of the chip, or display abnormal, please pay attention to now such as produced by the illegal use of abnormal conditions, as do not belong to the account
7, 1 channel photosensitive resistor signal input, support automatic brightness adjustment
8. 1-way body sensing signal input, external body sensing module is required
9. Standard 5-key keypad interface, and support two-color LED indicator display
10. Maximum output resolution supports LVDS defined LCD screen within 1920*1200.
11. Most of the drive board adopts full patch type components
12. support custom LOGO, can be read directly from U disk
13. support 180 degree image reversal display
14. Standardized MIC USB interface, mobile phone charger and charging cable can be directly used
15. Use USB flash drive to upgrade (16G flash drive is recommended)
Product appearance size :101.1x65.8x9mm
Note:
1.Please pay attention to the negative and positive -pole.
2. when you connect power please don't hot plug, which may break the main IC
3.don't touch the driver board, and keep it insulation, don' let metal touch it.
4.please take care of the flat cable.
Package includes:
1x Driver board
1x Remote control
1x 40pin flat cable cable